New Products
Replacement Stator for the 1994 to 1997 Honda VFRNeed to test yours? Here is a video from Ricks Motorsport Electrics showing…
Stator for 1990-1993 Honda VFRNeed to test yours? Here is a video from Ricks Motorsport Electrics showing how to test the…
Finally available we have the VFRness designed for the 1986-1987 VFR750F. This item may fit other years prior to…
1/2 hour of customization, to be used for pre-arranged custom billing.…
This simple switch works as a "High-Low" or "On-Off", but does NOT do "ON-OFF-ON"...there is no center or Off position.…
Butt Connectors with brazed barrels (won't split when crimping, perfect for soldering and then heat shrinking over).choose your size from…
Non-Insulated ring terminals with 1/4" hole...perfect for mounting accessories to battery bolts or to ground. Ideal for soldered connections,…
Stator Cover Gasket...part 1 in the picture shown. Required with Stator replacement. 11636-mcw-000 superseded by part # 11636-mcw-010…
Stator Cover Gasket...part #1 in the picture. Required for Stator replacement. 11636-MBG-000…
SB8125 Speed Bleeder
SB8125 Speed Bleeder
M8 x 1.25 x 27.99 Packaged with dust cap
This short bleeder is…
SB8125LL Speed Bleeder
SB8125LL Speed Bleeder
M8 x 1.25 x 38.09 Packaged with dust cap
This longer version is perfect…
This R/R connector repair kit contains both male and female connections with 3" of wire, crimp connectors, solder and dual…
Modified to mate with a late model R1 Regulator/Rectifier.…
This Stator Connector Repair Kit utilizes the same connectors as the OEM, with 3" leads terminating in butt connectors. …
R/R connector repair kit for 90-97 VFR and many CBR models. Fits all Honda Regulator Rectifiers with 2 large…
This ground buss includes 4 #8 sized ground loops in 16-14 gauge size, with dual walled heat shrink to finish…
Ox Gard is the perfect safeguard for aluminum to aluminum, aluminum to copper wire connections and aluminum conduit joints. …
This harness will allow the use of an R/R from a 98-99 VFR 800 on a 3rd or 4th gen…
Perfect for covering/protecting 14-16 gauge butt connections, ring terminals etc. The dual wall heat shrink has a 3:1 shrink…
Perfect for covering/protecting 14-16 gauge butt connections, ring terminals etc. The dual wall heat shrink has a 3:1 shrink…
